K92 Mining Announces Initial Phase 1 High-Grade Judd Vein System Drilling Results, Including 7.25m at 258.01 g/t AuEq
- Results reported for the first four holes of K92’s Phase 1 underground drill program of the sparsely drill tested Judd vein system. Drilling has identified a well-mineralized vein system, intersecting multiple parallel veins trending North-South, ~150-200 m East and subparallel to the producing Kora deposit, near mine infrastructure and within the mining lease.
- JDD 0006 intersected multiple veins, including recording 7.25 m at 256.09 g/t Au, 113 g/t Ag and 0.42 % Cu (258.01 g/t AuEq) on Judd Vein 1 (“J1”), approximately 30 m to the South and 50 m above the Judd bulk sample drive. This intersection is one of the highest-grade holes drilled by K92 at the Kainantu Gold Mine.
- JDD 0003 intersected multiple vein intersections, including 4.52 m at 10.81 g/t Au, 53 g/t Ag and 7.35 % Cu (22.40 g/t AuEq) at the J1 vein, approximately 60 m above the Judd bulk sample drive and above a higher grade portion of development.
- Mineralization is similar to Kora, an intrusive related Au-Cu-Ag epithermal vein system, and the J 1 bulk sample. Judd is open both up-dip and to depth, along strike and has been mapped over a 2.5km strike length.
VANCOUVER, British Columbia, Nov. 09, 2020 (GLOBE NEWSWIRE) -- K92 Mining Inc . (“ K92 ” or the “ Company ”) (TSX-V : KNT ; OTCQX : KNTNF) is pleased to announce results of the first four Phase 1 underground drill holes completed by K92 on the Judd vein system at the Kainantu Gold Mine in Papua New Guinea. The holes are part of the Phase 1 drill program targeting strike extensions of approximately 250 metres from the 1235 Level development drive in addition to up-dip and down-dip step-out drilling. The Judd vein system is located near-mine infrastructure, subparallel to and ~150-200 m East from the producing Kora deposit and within the mining lease.
To date, four known veins have been recorded at Judd, with similar vein orientation and quartz-sulphide Au-Cu-Ag mineralization as Kora. Similarly, the veins are essentially quartz/sulphide with brecciated country rock fragments or massive sulphide (dominated by chalcopyrite), or combinations of both styles. The veins remain open at depth and only a fraction of the over 2,500 m strike length has been drilled, with significant gaps remaining to be tested.
A total of four diamond drill holes are reported at Judd from the Phase 1 underground drill program, with significant intersections recorded from multiple veins. The results are highlighted by the J1 vein, with JDD0006 recording 7.25 m at 256.09 g/t Au, 113 g/t Ag and 0.42% Cu (258.01 g/t AuEq, 5.30 m true width), approximately 50 m above and 30 m to the South of the existing J1 Vein bulk sample development drive. JDD0006 is also one of the highest-grade drill holes recorded on the Kainantu property by K92. Approximately 150 m north of JDD0006 and 60m above the J1 vein development drive, JDD0003, along the J1 vein, recorded 4.52 m at 10.81 g/t Au, 53 g/t Ag and 7.35% Cu (22.40 g/t AuEq, 2.81 m true width). There are currently two drill rigs testing the Judd vein system, with drilling of hole JDD0005 underway by the second drill rig. The J1 vein bulk sample on the 1235 Level also remains underway, with the plan to report results upon batch processing the material.
(Gold equivalent (AuEq) is calculated using copper price of US$3.05/lb, silver price of US$16.05/oz and gold price of US$1,400/oz.)
John Lewins, K92 Chief Executive Officer and Director, stated, “We are extremely pleased with the first set of results from our Phase 1 underground drill program at Judd, delivering high-grade, solid thicknesses and similar mineralization to our producing Kora deposit. The results are highlighted by JDD0006 record ing 7.25 m at 256.09 g/t Au, 113 g/t Ag and 0.42 % Cu (25 8.01 g/t AuEq, 5.30m true width) on the J1 vein. JDD0006 is one of the highest grade drill holes recorded at the Kainantu Gold Mine by K92. Additionally, JDD0003 recorded 4.52 m at 10.81 g/t Au, 53 g/t Ag and 7.35% Cu (2 2.40 g/t AuEq, 2.81 m true width) on the J1 vein. Importantly, these results demonstrate the high-grade potential of the Judd vein system beyond results from the historical drilling near surface to the South, which include BKDD0002 recording 3.0 m at 278.2 g/t Au and 0.21% Cu and 053BD02 recording 9.0 m at 8.32 g/t Au and 1.11% Cu. (see Figure 2)
With only a fraction of Judd’s 2.5 km known strike length sparsely drill tested, we are very excited about its exploration potential. Exploration activities are ramping up, with nine drill rigs currently operating at Kainantu, and increasing to ten by year-end. By year-end, we expect to be drilling the Karempe, Kora, Kora South and Judd vein systems plus the Blue Lake porphyry concurrently. Preparations to increase the number of drill rigs in 2021 are underway.”
See Figure 1 for Judd Vein 1 Drill Results Long-Section.
See Figure 2 for Judd Vein Long-Section with Current Judd Vein Interpretations.
See Figure 3 for Location Map of the Judd Vein Target. Surrounding Veins and Infrastructure.
See Figure 4 for drill core photograph of JDD0006, 138.5 – 145.7 m, with massive sulphide / quartz veining; overall intersection downhole interval returned 7.25 m at 256.09 g/t Au, 113 g/t Ag and 0.42 % Cu (258.01 g/t AuEq).
Table 1 - Kainantu Gold Mine - Significant Intercepts from Diamond Drilling at Judd
Hole_id | From (m) | To (m) | Interval (m) | True width (m) | Gold g/t | Silver g/t | Copper % | Gold equivalent | Lode |
JDD0002 | 71.5 | 73.8 | 2.26 | 2.02 | 2.06 | 3 | 0.02 | 2.12 | |
JDD0002 | 103.9 | 107.2 | 3.30 | 2.93 | 0.18 | 2 | 0.07 | 0.31 | J1 |
JDD0002 | 162.0 | 165.0 | 2.96 | 2.64 | 0.49 | 34 | 2.75 | 4.99 | J2 |
JDD0003 | 168.2 | 172.7 | 4.52 | 2.81 | 10.81 | 53 | 7.35 | 22.40 | J1 |
including | 168.2 | 169.1 | 0.92 | 0.57 | 11.70 | 206 | 26.90 | 54.25 | J1 |
including | 169.1 | 170.1 | 1.00 | 0.62 | 20.60 | 35 | 3.21 | 25.80 | J1 |
including | 170.1 | 170.4 | 0.29 | 0.18 | 10.50 | 3 | 0.10 | 10.68 | J1 |
including | 170.4 | 170.8 | 0.40 | 0.25 | 3.89 | 1 | 0.01 | 3.92 | J1 |
including | 170.8 | 171.8 | 1.01 | 0.63 | 0.48 | 1 | 0.03 | 0.54 | J1 |
including | 171.8 | 172.7 | 0.90 | 0.56 | 13.80 | 16 | 5.76 | 22.59 | J1 |
JDD0003 | 177.1 | 179.5 | 2.47 | 1.53 | 1.12 | 13 | 4.70 | 8.29 | J1 |
including | 177.1 | 178.3 | 1.23 | 0.76 | 0.93 | 12 | 7.19 | 11.81 | J1 |
including | 178.3 | 179.5 | 1.24 | 0.77 | 1.31 | 14 | 2.23 | 4.80 | J1 |
JDD0003 | 189.6 | 190.0 | 0.36 | 0.22 | 1.01 | 31 | 4.13 | 7.54 | |
JDD0003 | 200.4 | 208.4 | 8.00 | 5.70 | 1.09 | 19 | 0.54 | 2.11 | J2 |
including | 200.4 | 200.7 | 0.25 | 0.18 | 1.05 | 5 | 0.17 | 1.36 | J2 |
including | 200.7 | 200.8 | 0.11 | 0.08 | 1.66 | 50 | 6.97 | 12.65 | J2 |
including | 200.8 | 201.0 | 0.24 | 0.17 | 0.30 | 3 | 0.08 | 0.45 | J2 |
including | 201.0 | 201.2 | 0.19 | 0.14 | 3.99 | 28 | 2.26 | 7.69 | J2 |
including | 201.2 | 202.2 | 1.01 | 0.72 | 0.16 | 23 | 0.46 | 1.11 | J2 |
including | 202.2 | 203.3 | 1.08 | 0.77 | 0.13 | 2 | 0.01 | 0.17 | J2 |
including | 203.3 | 204.4 | 1.09 | 0.78 | 1.12 | 18 | 0.23 | 1.67 | J2 |
including | 204.4 | 205.2 | 0.86 | 0.61 | 1.52 | 18 | 0.17 | 1.98 | J2 |
including | 205.2 | 206.0 | 0.77 | 0.55 | 0.57 | 16 | 0.33 | 1.25 | J2 |
including | 206.0 | 207.0 | 1.00 | 0.71 | 2.47 | 24 | 0.36 | 3.28 | J2 |
including | 207.0 | 207.5 | 0.46 | 0.33 | 0.41 | 32 | 1.24 | 2.63 | J2 |
including | 207.5 | 208.4 | 0.94 | 0.67 | 1.63 | 26 | 1.04 | 3.48 | J2 |
JDD0004 | 108.0 | 108.8 | 0.87 | 0.63 | 2.67 | 8 | 0.32 | 3.24 | |
JDD0004 | 120.7 | 13 0.9 | 1 0.25 | 7.47 | 0.14 | 4 | 0.3 0 | 0.63 | J1 |
Including | 120.7 | 120.9 | 0.22 | 0.16 | 1.84 | 6 | 2.31 | 5.36 | J1 |
Including | 120.9 | 121.9 | 1.00 | 0.73 | 0.06 | 3 | 0.05 | 0.17 | J1 |
Including | 121.9 | 122.9 | 1.00 | 0.73 | 0.07 | 5 | 1.20 | 1.92 | J1 |
Including | 122.9 | 123.9 | 1.00 | 0.73 | 0.26 | 7 | 0.83 | 1.58 | J1 |
Including | 123.9 | 124.3 | 0.40 | 0.29 | 0.07 | 4 | 0.26 | 0.50 | J1 |
Including | 124.3 | 125.3 | 1.00 | 0.73 | 0.07 | 2 | 0.03 | 0.14 | J1 |
Including | 125.3 | 126.3 | 1.00 | 0.73 | 0.03 | 1 | 0.02 | 0.07 | J1 |
Including | 126.3 | 127.3 | 1.00 | 0.73 | 0.15 | 9 | 0.14 | 0.46 | J1 |
Including | 127.3 | 128.3 | 1.00 | 0.73 | 0.05 | 1 | 0.02 | 0.09 | J1 |
Including | 128.3 | 129.1 | 0.80 | 0.58 | 0.02 | 1 | 0.01 | 0.05 | J1 |
Including | 129.1 | 129.7 | 0.55 | 0.40 | 0.07 | 1 | 0.01 | 0.10 | J1 |
Including | 129.7 | 130.0 | 0.35 | 0.25 | 0.28 | 4 | 0.10 | 0.48 | J1 |
Including | 130.0 | 130.9 | 0.93 | 0.68 | 0.12 | 4 | 0.17 | 0.42 | J1 |
including | 130.9 | 133.0 | 2.07 | 1.50 | 6.98 | 7 | 0.43 | 7.70 | J1 |
Including | 130.9 | 131.7 | 0.75 | 0.54 | 15.84 | 9 | 0.43 | 16.59 | J1 |
Including | 131.7 | 132.4 | 0.70 | 0.51 | 0.34 | 8 | 0.48 | 1.15 | J1 |
Including | 132.4 | 132.6 | 0.17 | 0.12 | 11.11 | 3 | 0.21 | 11.46 | J1 |
Including | 132.6 | 133.0 | 0.45 | 0.33 | 0.98 | 4 | 0.43 | 1.67 | J1 |
JDD0004 | 138.6 | 139.2 | 0.58 | 0.42 | 0.60 | 8 | 1.76 | 3.32 | JL |
Including | 138.6 | 138.7 | 0.15 | 0.11 | 0.47 | 7 | 0.55 | 1.37 | JL |
Including | 138.7 | 139.0 | 0.23 | 0.17 | 0.07 | 4 | 0.08 | 0.24 | JL |
Including | 139.0 | 139.2 | 0.20 | 0.15 | 1.32 | 12 | 4.59 | 8.31 | JL |
JDD0004 | 163.8 | 165.8 | 2.00 | 1.42 | 1.24 | 6 | 0.36 | 1.85 | J2 |
Including | 163.8 | 164.0 | 0.24 | 0.17 | 0.44 | 18 | 0.44 | 1.30 | J2 |
Including | 164.0 | 164.7 | 0.64 | 0.46 | 0.37 | 4 | 0.26 | 0.80 | J2 |
Including | 164.7 | 165.1 | 0.39 | 0.28 | 1.34 | 8 | 0.67 | 2.43 | J2 |
Including | 165.1 | 165.6 | 0.51 | 0.36 | 0.99 | 3 | 0.35 | 1.55 | J2 |
Including | 165.6 | 165.8 | 0.22 | 0.16 | 5.06 | 3 | 0.04 | 5.15 | J2 |
JDD0004 | 182.4 | 190.5 | 8.10 | 5.41 | 0.54 | 7 | 0.14 | 0.83 | J3 |
Including | 182.4 | 183.2 | 0.81 | 0.58 | 1.16 | 4 | 0.15 | 1.43 | J3 |
Including | 183.2 | 183.3 | 0.12 | 0.09 | 9.86 | 28 | 0.15 | 10.41 | J3 |
Including | 183.3 | 184.3 | 0.97 | 0.69 | 0.01 | 1 | 0.01 | 0.04 | J3 |
Including | 184.3 | 185.3 | 1.00 | 0.71 | 0.01 | 1 | 0.01 | 0.04 | J3 |
Including | 185.3 | 186.3 | 1.00 | 0.71 | 0.01 | 1 | 0.01 | 0.04 | J3 |
Including | 186.3 | 187.3 | 1.00 | 0.71 | 0.01 | 1 | 0.01 | 0.04 | J3 |
Including | 187.3 | 188.0 | 0.74 | 0.53 | 0.01 | 1 | 0.00 | 0.02 | J3 |
Including | 188.0 | 189.0 | 0.93 | 0.66 | 1.41 | 13 | 0.07 | 1.66 | J3 |
Including | 189.0 | 189.2 | 0.22 | 0.16 | 0.91 | 76 | 2.45 | 5.44 | J3 |
Including | 189.2 | 189.4 | 0.25 | 0.18 | 0.31 | 9 | 0.02 | 0.44 | J3 |
Including | 189.4 | 190.0 | 0.56 | 0.40 | 0.68 | 24 | 0.51 | 1.72 | J3 |
Including | 190.0 | 190.5 | 0.50 | 0.36 | 0.11 | 2 | 0.03 | 0.18 | J3 |
JDD0006 | 138.5 | 145.7 | 7.25 | 5.30 | 256.09 | 113 | 0.42 | 258.01 | J1 |
including | 138.5 | 138.8 | 0.33 | 0.24 | 42.50 | 38 | 0.50 | 43.68 | J1 |
including | 138.8 | 139.6 | 0.79 | 0.58 | 1.73 | 4 | 0.25 | 2.15 | J1 |
including | 139.6 | 140.0 | 0.41 | 0.30 | 1.63 | 2 | 0.19 | 1.94 | J1 |
including | 140.0 | 140.9 | 0.93 | 0.68 | 10.68 | 177 | 0.64 | 13.67 | J1 |
including | 140.9 | 141.5 | 0.61 | 0.45 | 45.20 | 370 | 1.04 | 51.00 | J1 |
including | 141.5 | 142.0 | 0.46 | 0.34 | 0.56 | 1 | 0.03 | 0.62 | J1 |
including | 142.0 | 142.4 | 0.44 | 0.32 | 23.90 | 6 | 0.08 | 24.09 | J1 |
including | 142.4 | 142.7 | 0.30 | 0.22 | 5874.30 | 1190 | 1.12 | 5889.62 | J1 |
including | 142.7 | 143.4 | 0.64 | 0.47 | 16.12 | 29 | 0.18 | 16.72 | J1 |
including | 143.4 | 143.7 | 0.27 | 0.20 | 16.57 | 47 | 2.14 | 20.31 | J1 |
including | 143.7 | 143.9 | 0.28 | 0.20 | 4.37 | 23 | 0.48 | 5.35 | J1 |
including | 143.9 | 144.7 | 0.73 | 0.53 | 0.51 | 6 | 0.10 | 0.73 | J1 |
including | 144.7 | 145.3 | 0.67 | 0.49 | 13.69 | 13 | 0.13 | 14.03 | J1 |
including | 145.3 | 145.7 | 0.39 | 0.28 | 11.43 | 2 | 0.03 | 11.50 | J1 |
JDD0006 | 154.0 | 155.0 | 1.00 | 0.73 | 1.91 | 1 | 0.01 | 1.94 |
Table 2 - Kainantu Gold Mine – Collar Locations for Judd Diamond Drilling
Hole_id |
Collar location | Collar orientation | EOH depth (m) |
Lode |
|||
Local north | Local East | RL | Inclination | Local azimuth | |||
JDD0001 | 29856 | 58775 | 1192 | 0.50 | 96.20 | 209.4 | Judd |
JDD0002 | 58691 | 29863 | 1214 | 15.10 | 109.86 | 221.1 | Judd |
JDD0003 | 58694 | 29863 | 1215 | 31.50 | 59.58 | 224.1 | Judd |
JDD0004 | 58534 | 29860 | 1219 | 37.60 | 100.33 | 200.4 | Judd |
JDD0006 | 58691 | 29863 | 1215 | 32.00 | 124.54 | 169.9 | Judd |
(1) Gold equivalent in Table 1 uses copper price of US$3.05/lb; silver price of US$16.05/oz and gold price of US$1,400/oz.
Table 3 – Global Kora Mineral Resource Estimate (effective date April 2, 2020)
Tonnes | Gold | Silver | Copper | AuEq | |||||
mt | g/t | moz | g/t | moz | % | kt | g/t | moz | |
Measured | 0.66 | 13.34 | 0.28 | 11.6 | 0.25 | 0.51 | 3.4 | 14.14 | 0.3 |
Indicated | 2.47 | 8.44 | 0.67 | 16.3 | 1.29 | 0.63 | 15.6 | 9.46 | 0.8 |
Total M&I | 3.13 | 9.47 | 0.95 | 15.3 | 1.54 | 0.61 | 19 | 10.45 | 1.1 |
Inferred | 12.67 | 7.32 | 2.98 | 19.9 | 8.11 | 1.1 | 139.4 | 9.01 | 3.7 |
- Mineral Resource E stimate is included in a technical report titled, “Independent Technical Report, Mineral Resource Estimate Update and Preliminary Economic Assessment for Expansion of the Kainantu Mine to Treat 1 Mtpa from the Kora Gold Deposit, Kainantu Project, Papua New Guinea” with an effective date of April 2, 2020.
- The Independent and Qualified Person responsible for the Mineral Resource Estimate is Simon Tear, P.Geo . of H & S Consultants Pty. Ltd., Sydney, Australia.
- Mineral Resources are not Mineral Reserves and do not have demonstrated economic viability.
- Resources were compiled at 1,2,3,4,5,6,7,8,9 and 10 g/t gold cut-off grades.
- Density (t/m 3) is on a per zone basis, K1 and Kora Link: 2.84 t/m 3; K2: 2.93 t/m 3 ; Waste: 2.8 t/m 3
- Reported tonnage and grade figures are rounded from raw estimates to reflect the order of accuracy of the estimate.
- Minor variations may occur during the addition of rounded numbers.
- Calculations used metric units (metres, tonnes and g/t)
- Gold equivalents are calculated as AuEq = Au g/t + ((0.923 x Cu %)* 1.38)+ ((0.77 x Ag g/t*0.0115). Gold price US$1,400/oz; Silver US$16.05/oz; Copper US$3.05/lb. Metal payabilities and recoveries are incorporated into the AuEq formula. Recoveries of 92.3% for copper and 77% for silver.
Qualified Person
K92 mine geology manager and mine exploration manager, Andrew Kohler, PGeo, a qualified person under the meaning of Canadian National Instrument 43-101 – Standards of Disclosure for Mineral Projects, has reviewed and is responsible for the technical content of this news release.
About K92
K92 Mining Inc. is engaged in the production of gold, copper and silver from the Kora deposit at the Kainantu Gold Mine in the Eastern Highlands province of Papua New Guinea, as well as exploration and development of mineral deposits in the immediate vicinity of the mine. The Company declared commercial production from Kainantu in February 2018 and is in a strong financial position.
The Company commenced an expansion of the mine based on an updated Preliminary Economic Assessment on the property which was published in January 2019 and updated in July 2020. K92 is operated by a team of mining company professionals with extensive international mine-building and operational experience.
On Behalf of the Company,
John Lewins, Chief Executive Officer and Director
For further information, please contact David Medilek, P.Eng., CFA at +1-604-687-7130.
NEITHER TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.
CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING INFORMATION: This news release includes certain “forward-looking statements” under applicable Canadian securities legislation. Forward-looking statements are necessarily based upon a number of estimates and assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking statements. All statements that address future plans, activities, events, or developments that the Company believes, expects or anticipates will or may occur are forward-looking information, including statements regarding the realization of the preliminary economic analysis for the Kainantu Project, expectations of future cash flows, the planned plant expansion, production results, cost of sales, sales of production, potential expansion of resources and the generation of further drilling results which may or may not occur. Forward-looking statements and information contained herein are based on certain factors and assumptions regarding, among other things, the market price of the Company’s securities, metal prices, exchange rates, taxation, the estimation, timing and amount of future exploration and development, capital and operating costs, the availability of financing, the receipt of regulatory approvals, environmental risks, title disputes, failure of plant, equipment or processes to operate as anticipated, accidents, labour disputes, claims and limitations on insurance coverage and other risks of the mining industry, changes in national and local government regulation of mining operations in PNG, mitigation of the Covid-19 pandemic, continuation of the lifted state of emergency, and regulations and other matters. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. The Company disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.
Figure 1 – Judd Vein 1 Long-Section
https://www.globenewswire.com/NewsRoom/AttachmentNg/f3d78c10-d498-422e-8cb7-baf459f12408
Figure 2 - Judd Vein System long-section including Judd Vein interpretations (“Interps”) based on sparse drilling
https://www.globenewswire.com/NewsRoom/AttachmentNg/32f946de-a11d-4498-953a-e1bdb1d3c81e
Figure 3 – Location Map of the Judd Vein System, Surrounding Veins and Infrastructure
https://www.globenewswire.com/NewsRoom/AttachmentNg/ed197811-6da3-46a7-b4ed-bf89b9681eb6
Figure 4 - JDD0006 Core Photograph, 138.5 – 145.7m, with massive sulphide / quartz veining; overall intersection downhole interval returned 7.25 m at 256.09 g/t Au, 113 g/t Ag and 0.42 % Cu (258.01 g/t AuEq)
https://www.globenewswire.com/NewsRoom/AttachmentNg/8232d461-937e-4e7f-b9a2-7b41ee626036